Skip to content
Koidra
Book a demo

Rotating assets

Dies, rollers and pumps that come back from repair keep one history, with their usage counted for them.

A die, a roller or a pump that comes back from repair is not a new part, and treating it as one loses its history. Koidra keeps one record per part, across every machine it runs in.

A die's loop through the plantA die runs in a press, comes off at a swap, is repaired or scrapped in the workshop, waits in the store, and goes back into a press at the next swap.swapnext swapIn the pressWorkshoprepair or scrapStore
A die runs, comes off, is repaired and goes back in. Each swap is recorded on the work order.

How it works

  1. Swap the part on the work order

    The job that does the swap records which part came off and which went on, and it cannot be completed until it does.

  2. The worn part gets a job of its own

    The part that came off goes to the workshop with a repair-or-scrap work order.

  3. Its history follows it

    Each part lists every machine it ran in and, with Process Optimization, the usage it ran there.

Beside other maintenance software

Our CMMS
Swapped on the work order, which cannot close without it. The worn part gets a repair job of its own
MaintainX
Move a sub-asset to another parent asset
UpKeep
Set a parent asset; check-in and check-out on Enterprise
Fiix
Rotating Assets module, Professional and Enterprise plans

From each vendor's published pricing and help center. The full comparison

More features

See Koidra on your own plant data

Bring a week of readings from one line. We will show you what the platform sees, what it would have flagged, and what it would have scheduled.

Book a demo