Skip to content
Koidra
Book a demo

Integrations

Your control system stays where it is

Koidra runs on top of the PLCs and SCADA already in the plant. Here is what we read, what we write, and what happens when a system is not on the list.

OPC UA
Read and write. Most modern PLC and SCADA systems.
Modbus TCP and RTU
Read. Meters, drives, sensors and controllers that speak those protocols.
The Koidra Controller
Read and write. For sites that need a dedicated control layer of their own.

Where an integration is not available, we build the connector. There is no separate integration license.

Reading is one thing. Writing is another.

Everything but KoPilot runs on read-only access to plant data. Closed-loop control with KoPilot needs write access, and every command goes through a supervisory layer that holds it inside the operating limits your process engineers define.

What Koidra reads from a plant, and what it writesPLCs and SCADA over OPC UA, meters and drives over Modbus, and the Koidra Controller all feed one record, read-only. Only KoPilot writes back, through a supervisory layer that holds the operating limits.PLC and SCADAOPC UAOne operational recordread-only is enough for everything but controlMeters, drives, sensorsModbus TCP and RTUKoidra Controllerwhere a dedicated layer is neededKoPilotSupervisory layercommands held inside operating limitsSetpoints written backto the PLC, and nothing else
Everything reads. Only KoPilot writes, and it writes through a layer that holds the limits your process engineers set.

Tell us what runs your plant

Send us the PLC and SCADA makes and a sample export. We will tell you what we can read, what we can write, and what would need building.

Talk to our team